谘詢電話: 400-1183-918

垃圾處理設備廠家

 聯係向日葵视频免费下载安装app

400-1183-918 

疊螺式汙泥壓濾機


汙泥脫水設備

概述 DESCRIPTION


疊螺式汙泥壓濾機可廣泛用於市政汙水處理工程以及石化、輕工、化纖、造紙、製藥、皮革等工業行業的水處理係統。實際運行情況證明,疊螺式汙泥脫機水可為客戶創造可觀的經濟效益和社會效益。

1、濃縮:當螺旋推動軸轉動時,設在推動軸外圍的多重固活疊片相對移動,在重力作用下,水從相對移動的疊片間隙中濾出,實現快速濃縮。

2、脫水:經過濃縮的汙泥隨著螺旋軸的轉動不斷往前移動;沿泥餅出口方向,螺旋軸的螺距逐漸變小,環與環之間的間隙也逐漸變小,螺旋腔的體積不斷收縮;在出口處背壓板的作用下,內壓逐漸增強,在螺旋推動軸依次連續運轉推動下,汙泥中的水分受擠壓排出,濾餅含固量不斷升高,最終實現汙泥的連續脫水。

3、自清洗:螺旋軸的旋轉,推動遊動環不斷轉動,設備依靠固定環和遊動環之間的移動實現連續的自清洗過程,從而巧妙地避免了傳統脫水機普遍存在的堵塞問題。

Fold the screw type sludge filter press can be widely used in municipal sewage treatment project and petrochemicals, light industry, chemical fiber, paper making, pharmacy, industry of water treatment systems, such as leather. Actual operation proves that the stack of screw type sludge water offline for clients to create considerable economic benefits and social benefits.

1, enrichment: when screw drive shaft rotation, is located in the drive shaft periphery of multiple solid laminated relative movement, under the effect of gravity, the water from the relative motion of laminated clearance leach, achieve rapid enrichment.

2, dehydration: after concentrated sludge as the rotation of the screw axis moves forward continuously; Along the direction of mud cake export, pitch of screw axis gradually become smaller, gaps between ring and ring also gradually become smaller, the spiral cavity volume shrinking; Back pressure plate at the exit of ?


設備特點 CHARACTERISTICS


疊螺式汙泥壓濾機是用離心沉降方式連續分離懸浮液的分離設備,具有處理量大、能耗低、結構緊湊、維護方便。下麵小編將具體闡述一下它的結構特點。

1.分離因素高,最佳的液層,實現轉鼓轉速和差轉速無級調節,從而保證物料的分離效果。

2.雙電機、雙變頻設計(根據客戶需求可以設計單電機單變頻)。

3.可調節液麵高度,根據物料的不同性質調節離心機的液麵高度,達到最佳。

4.工藝上采用先進的差速器,軸承采用進口,從而顯著延長轉鼓部件的壽命。

5.驅動電機采用變頻器,實現軟啟動和轉鼓轉速的無級調節。

6.主要部件采用優化設計,轉鼓、螺旋采用先進動平衡技術,對其進行三維平衡。

7.離心機的使用和維護更加簡便,提高維修效率。

Fold the screw type sludge filter press is a continuous separation of suspending liquid centrifugal settling way of separation equipment, has a large capacity, low energy consumption, compact structure, easy maintenance. Small make up below describe its structure characteristics.

1. The separation factor is high, the best liquid layer, realize the drum rotating speed and differential speed stepless adjustment, so as to ensure the separation effect of the material.

2. Double motors, double frequency conversion design (according to the needs of customers can design single motor frequency conversion).

3. Adjustable liquid level height, according to the different nature of the material to adjust the level of the centrifuge, the best.

4. Process adopts advanced differential bearing imported, significantly prolong the life of drum parts.

5. Drive motor adopts frequency converter to realize soft starting and drum rotational speed stepless

  • 在線客服
  • 聯係電話
    13906460995
  • 在線留言
  • 在線谘詢
    歡迎給向日葵视频免费下载污app免费留言
    請在此輸入留言內容,向日葵视频频app下载會盡快與您聯係。
    姓名
    聯係人
    電話
    座機/手機號碼
    郵箱
    郵箱
    地址
    地址